Budget mirror finishing kit
PICT0641
Larger picture

This kit is only used on aluminium, stainless, brass, copper, where the metal has already been polished to a shine.  The kit will restore and reshine to a mirror finish.  The blue compound is a finer finishing compound therefore a deeper mirror finish can be achieved

 
0.550 kg

Contents:
1 x 4 x 1 calico G finishing mop                          
1 x 2 x 1 calico G finishing mop
2 x mini blue polishing bars
1 x drill arbour
1 x instructions
1 x mask

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Budget standard mirror finishing kit
PICT0625
Larger picture
This kit is to be used after all abrasive and pre-polishing work has been done.  The kit will restore dull and soiled surfaces to a mirror finish, mainly on aluminium, stainless, brass and copper.
0.620 kg

Contents:
1 x 4 x 1 calico G mop
1 x 4 x 1 white stitched mop
1 x mini white polishing bar
1 x drill arbour
1 x instructions
1 x mask

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Aluninium high finish lacquer
DSC00418
Larger picture
This lacquer is formulated to give a highly polished aluminium surface a protective coating. The lacquer is quick dying. Simply brush and leave to dry. The lacquer is also suitable for other metals.

 

The lacquer is suitable for the following motorcycle parts

                       Frames
                       Swinging arms
                       Levers
                       Footrests + hangers
                       Forks
                       Yokes
                       Wheels
                       Rear Subframes
                       Other alloy fittings

                       Note The lacquer is not suitable for engine parts

6 piece plastic and perspex polishing kit
6 piece plastic and perspex polishing kit
Larger picture
Ideal for cleaning and restoring fibreglass car bodies, sidecar bodies, motorcycle fairings, plastic bumpers, mudguard's, perspex windscreens, etc.
0.550 kg

Kit includes,1 of each:
100 x25mm Calico B roughing mop     
Steel arbor for drill
100 x 25mm Calico G finishing mop     
Set of instructions
Mini Bar of Tripoli roughing polish        
Mini bar Vonax finishing polish  Catalogue
Plus a dust mask

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

9 piece std. polishing kit s-steel and alloy
9 piece std. polishing kit s-steel and alloy
Larger picture

A smaller version of our Heavy Duty polishing kit. For use on any DIY electric drill. Will polish out most minor scratches from say 240grit abrasive paper and polish to a mirror finish on all metals i.e. aluminium alloys, copper, brass, steel, stainless and chrome. A good all round polishing kit mainly for medium to large areas on a mtorcycle/car or for industrial polishing.

Please note:  If parts are lacquered, scratched, anodised or have any other coating you must complete all abrasive work before using this kit

See abrasive or this section for pre-polishing abrasive kits
1.000 kg

Kit includes:
1 x Steel arbor,
1 x 100mm x 25mm Sisal st/mop,
1 x 100mm x 25mm white st/mop
1 x 100mm x 25mm calico finishing mop
1 x mini bar supercut polish,
1 x mini bar blue polish/white
I x dust mask and instructions
1 x felt bob.

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Click here for a short slideshow on engine casing polishing

Deluxe alloy wheel polisihng kit
DSC00158
Larger picture

Note:  This kit includes the essential polishing felts needed to reach counterbores, recesses and hard to reach places.

This kit is primarily designed to complete polishing work on alloy wheels.  If any abrasive work is needed to remove scratches etc. see abrasive kit in this section.

This polishing kit is also suitable for polishing ths following: 

1.650 kg
  • Levers
  • Rear subframes
  • Footrest hangers
  • Some car engine parts
  • Medium alloy areas
  • DIY

Kit contains:

  • 1 x 1 x 1 Sisal start mop
  • 1 x 1 x 1 White stitched mop
  • 1 x 1 x 1 Calico finishing mop
  • 1 x 2 x 1 Sisal Start mop
  • 1 x 2 x 1 White stitched mop
  • 1 x 2 x 1 Calico finish mop
  • 1 x 3 x 1 Sisal mop
  • 1 x 3 x 1 White stitched mop
  • 1 x 3 x 1 Calico finishing mop
  • 2 x goblet taper mops (for spokes)
  • 1 x cabbage mop soft (for concave areas)
  • 1 x 400,800,1200, wet and dry paper
  • 1 x drill arbour
  • 1 x long series arbour
  • 2 x mounted felt cones 6 x 10
  • 2 x mounted felt cones 10 x 10
  • 2 x unmounted felt cones 20 x 45
  • 1 x small grey polish
  • 1 x small white polish
  • 1 x instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Abrasive rubber points
DSC00411
Larger picture
Abrasive rubber points are excellent to complete abrasive work on hard to reach small areas on aluminium, i.e. counterbores, recesses etc.  300 grit satene on a small felt can be used after the rubber points to prepare a surface for final polising.

Contents

2 x abrasive rubber points (bobs) 120 grit 10 x 15

2 x abrasive rubber points (cones) 220 grit 10 x 20

2 x abrasive rubber points (bobs) 220 grit 10 x 20

2 x abrasive rubber points (cones) 120 grit 10 x 15

Deluxe Motorcycle engine casing abrasive and polishing kit - see menu for prices
DSC00235
Larger picture

Note:  This kit includes the essential abrasive rubber points and felts needed to reach counterbores, recesses and hard to reach places.

Click here for a short slideshow on engine casing polishing

This kit is designed to be used with a hand drill, the kit removes medium to light scratches, anodised coatings from motorcycle aluminium engine casings and hole recesses and polishes to a high finish. The kit is complete with abrasive rubber points for abraive work on small hard to reach areas. 300 grit satene and a felt can be used after the rubber points for final abrasive preparation.  (This kit is designed with the appropriate mops, saving time on any wire brushing on the mops between abrasive applications) The kit is also suitable for polising the following:

  • motorcycle aluminium levers
  • footrests
  • small to medium areas
  • rear subframes
  • forks
  • yokes

a)  To remove heavier scratches see menu 

b)  If casings only require polishing see menu for reduced price

 

P = polishing kit only

 

Kit contains:

  • P = 1 x 1 x 1 sial start mop
  • P = 1 x 1 x 1 white stitched mop
  • P = 1 x 1 x 1 Calico finishing mop
  • P = 1 x 2 x 1 Sisal start mop
  • P = 1 x 2 x 1 white stitched mop
  • P = 1 x 2 x 1 calico finish mop
  • P = 1 x 3 x 1 sisal start mop
  • P = 1 x 3 x 1 stitched middle mop
  • P = 1 x 3 x 1 calico finish mop
  • P = 4 x 10 x 10 felt cones
  • P = 4 x unmounted various felts (large)
  • P = 1 x 400,800,1200 wet and dry paper
  • P = 1 x drill arbour
  • P = 1 x small supercut polish
  • P = 1 x small white finish polish 
  •       1x Abrasive rubber points 120 grit
  •       1x Abrasive rubber points 220 grit
  •       1 x instructions
  •       1 x half bar 240 grit satene
  •       1 x half bar 300 grit satene
  •       2 x 3 x 1 coloured stitched mops

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Swinging arm and frame polishing kit
Larger Picture
Larger Picture

This kit removes removes medium scratches anodised coatings and lacquer.  The kit polishes akuminium swinging arms and frames to a mirror finish.  (This kit is designed with the appropriate mops, saving time on any wire brushing on the mops between abrasive applications)  The kit can also be used to polish various other medium to large aluminium or stainless surfaces.

 
1.680 kg

Kit includes

2 x 1 Sisal start mop
2 x 1 Stitched middle polish mop
2 x 1 Calico
1 x 100 x 25 sisal
1 x 100 x 25 stitched
1 x 100 x 25 calico
2 x 3 x 1 coloured stitched
2 x half bars of polish
half x bar satene 300 grit
half x bar satene 240 grit
1 x wet and dry 400 and 800 grit
4 x assorted felts medium and large
1 x drill arbour
Dust mask
Instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

General purpose polishing kit
general purpose polishing kit
Larger picture
A small general purpose polishing kit which will polish most aluminium alloys, copper, brass and steel to a bright finish and will remove marks and scratches from 400 grit abrasive paper. Sufficient for 1 bike or car or any jobs around the house copper kettles, brass door handles etc.
0.560 kg

 

 

 

Kit includes:
1 Steel arbor
4x1   coloured stitched 
4x1   calico mop
1 x green mini  bar
1 Mini bar Tripoli
1 Dust mask and instructions
1 felt bob

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

15 piece heavy duty polishing kit
15 inch heavy duty
Larger picture

Complete kits specially produced for use with any standard DIY electric drill. Polish up aluminium to mirror finish, The kit contains enough materials to polish all alloy parts on several bikes or cars.

Please note:  If parts are lacquered, scratched, anodised or have any other coating you must complete all abrasive work before using this kit.

See abrasive or this section for pre-polishing abrasive kits

Click here for a short video on motorcycle frame polishing
1.480 kg

 

The kit includes:

Half bar of supercut       
1 dust mask
1 of 100 x 25mm sisal st/ mop
1 of 100 x 25mm white st/ mop
1 of 100 x 25mm cloth mop, quality 'G'
3 x dental brushes
Half bar white or blue finishing polish
1 of steel adaptor for drill
4 felt bobs

Click here for a short video on motorcycle frame polishing

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

6" set of mops + LH RH pigtails
6 inch set of mops + LH RH pigtails
Larger picture

6" mops sisal, stitched, calico and 2 arbours R/H and L/H
Ideal general purpose mops and the best all-round mop for finishing steel and pressed brassware, nickel, silver, copper, aluminium and for finishing nickel and chrome deposits. Used extensively in the jewellery trade for grease mopping of gold and silver, etc. Available in 13, 25, 38 and 50mm sections, loose leaf-unstitched. Stitched varieties available to order. Can also be used on plastics. These mops are also available in diameters from 75 to 300mm


 
1.200 kg

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Mini mop multi purpose kit
PICT0607
Larger picture
This kit includes mini-mops and polishes for all those little polishing jobs around the house, car, garage, kitchen, motorcycle, bike etc.  The kit includes polishes for alloy, brass, stainless, copper, steel, plastics, perspex, chromes, knives and spoons etc.
0.895 kg

 

 

 

Kit includes
1 x 2" x 1" sisal mop
1 x 1" x 1" sisal mop
2 x 2" x 1" calico mops
2 x 1" x 1" stitched mops
1 x 25mm x 30mm felt cone
1 x 25mm x 30mm felt bob
1 x 12mm x 20mm felt bob
1 x felt arbour
1 x drill arbour
1 x brown polish (brass)
1 x green (chrome/multipurpose)
1 x white (alloy/stainless/steels)
1 x grey (initial polishing of metals)
1 x light brown (vonax) for plastics and perspex
1 x Instructions
1 x Dust mask
1 x polishing manual

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Chrome kit
PICT0603
Larger picture
This kit is mainly for polishing chrome or tarnished chrome to a mirror finish, and then protect it with Belgom Chromes.
0.880 kg

 

 

 

Kit includes
1 x 4” x 1” calico ‘B’ mop
1 x 4” x 1” calico ‘G’ mop
1 x chrome green polish
1 x drill arbour
1 x Instructions
1 x Dust mask
1 x polishing manual

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Felt bob and cone mounted and unmounted polishing kit
PICT0619
Larger picture

This larger felt bob and cone kit gives you an extended range of polishing applications.  With longer reaching polishing capabilities enabling you to polish parts such as brake levers, foot rests, underside of frames etc.

FOR MORE FELT BOB ABRASIVE AND POLISHING KITS SEE FELT BOB KIT SECTION
0.500 kg

 

 

Contents:
4 x large unmounted bobs and cones
10 x mounted bobs and cones
1 x grey supercut polish bar
1 x white finishing polishing bar
1 x felt spindle
1 x instructions
1 x mask

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Budget metal multi-purpose DIY buffing kit
PICT0649
Larger picture
This kit works on all materials that are in good condition.  the kit will restore and bring back a new shine to dull looking metals, it's cheap, quick and easy to use, anyone can do it!
0.350 kg

Kit contains
1 x 4 x 1 calico mop
1 x green multi-purpose polish
1 x drill arbour
1 x mask
1 x instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Non-ferrous mini mop polishing kit
PICT0650
Larger picture
This kit is ideal for polishing motorcycle brake levers, foot-rests, aluminium door handles, small engine parts.  This kit can bring stainless and clean aluminium to a mirror finish.
0.480 kg

 

 

 

Kit contains
2 x 2 x 1 sisal mop
2 x 2 x 1 white stitched mop
2 x 2 x 1 calico mop
2 x 1 x 1 white stitched mop
1 x white bar polish
1 x grey supercut polish
1 x drill arbour
1 x mask
1 x instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Abrasive kit
DSC00224
Larger picture

This kit is an excellent kit to use with a hand drill, the kit removes medium/light scratches, anodised coating, lacquer, marks on motorcycle swinging arms, frames, forks etc.  DO NOT use coarse abrasives on welded parts of the frames, the welds can be cleaned with light wet and dry paper and polished. 

The kit will prepare aluminium stainless and steel surfaces ready for polishing
2.000 kg

Kit contains:

  • 1 x 150 60 x 20 grit flap wheel
  • 2 x mini 30 x 10 flap wheels 150 grit
  • 2 x 2 x 1 coloured stitched mops
  • 2 x 4 x 1 coloured stitched mops
  • 2 x 3 x 0.5 coloured stitched mops
  • 1 x half bar 240 grit satene
  • 1 x half bar 300 grit satene
  • 5 x variety felt bobs and cones
  • 1 x arbour
  • 1 x 400,800,1200 wet and dry paper
  • 1 x instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Car rocker cover abrasive and polishing kit - see drop down menu for prices
DSC00229
Larger picture

This kit is designed to be used with a hand drill.  The kit removes dirt, paint, anodised coatings, medium light scratches from aluminium car rocker covers and polishes the cover to a high finish, it also contains abrasive rubber points and felts to polish the hole recesses and tricky bits.  The kit can be used to polish other parts on car engines.

Note:

a)  If the rocker cover only requires polishing see menu

b)  To remove heavy scratches or lacquer see menu

P = polishing kit only

Kits contains:

  • P = 1 x 3 x 1 Sisal start mop
  • P = 1 x 3 x 1 White stitched mop
  • P = 1 x 4 x 1 Calico finishing mop
  • P = 4 x felt bobs 6 x 10
  • P = 4 x felt bobs 10 x 10
  • P = 4 x felt cones 12 x 20
  • P = 1 x drill arbour
  • P = 1 x miniwhite polish
  • P = 1 x mini grey polish
  • P = 1 x 400,800,1200 wet and dry paper
  •       1 x rubber abrasive bob points 120 grit 
  •       1 x rubber abrasive bob points 220 grit
  •       1 x rubber abrasive cone points 120 grit 
  •       1 x rubber abrasive cone points 220 grit
  •       1 x 4 x 4 lapp medium fibral mop (paint)
  •       1 x 0.25 bar satene 240 grit
  •       1 x 0.25 bar of satene 300 grit
  •       2 x 3 x 1 coloured stitched mops
  •       1 x instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing

Coldax cement abrasive kit
DSC00240
Larger picture
This kit is used with a hand drill, apply the coldax to the coloured mops, coat with abrasive grits and when dried the mops become an abrasive wheel, excellent for heavy, medium light scratch removal, pre-polishing work, the kit is suitable for steels, alloys and stainless steels.
1.350 kg

 

Kit contains

  • 1 x tub 80 grit abrasive 250 grams
  • 1 x tub 150 grit abrasive 250 grams
  • 1 x tub 240 grit abrasive 250 grams
  • 1 x tub coldax cement 200 grams
  • 1 x drill arbour
  • 3 x 3 x 0.5 coloured mop
  • 3 x 2 x 1 coloured mops
  • 1 x 4 x 1 coloured mops
  • 1 instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing 


"" is powered by ShopFactory e-commerce software, award winning shopping cart software to create online shops to sell online.