Polishing kits

Budget mirror finishing kit

Larger picture

This kit is only used on aluminium, stainless, brass, copper, where the metal has already been polished to a shine. The kit will restore and reshine to a mirror finish. The blue compound is a finer finishing compound therefore a deeper mirror finish can be achieved

Click here for a short video on Alloy wheel polishing

Contents:

1 x 4 x 1 calico G finishing mop

1 x 2 x 1 calico G finishing mop

2 x mini blue polishing bars

1 x drill arbour

1 x instructions

1 x mask

Budget preparation polishing kit

Larger picture

This kit is for use after abrasive work has been done, a great kit for polishing metal to a general shine. Used on alloy, stainless, this kit will not produce a mirror finish.

Contents:

2 x 3 x 1 coloured stitched mop

1 x 4 x 0.5 coloured stitched mop

1 x mini grey supercut

1 x drill arbour

1 x instructions

1 x mask

Budget standard mirror finishing kit

Larger picture

This kit is to be used after all abrasive and pre-polishing work has been done. The kit will restore dull and soiled surfaces to a mirror finish, mainly on aluminium, stainless, brass and copper.

Contents:

1 x 4 x 1 calico G mop

1 x 4 x 1 white stitched mop

1 x mini white polishing bar

1 x drill arbour

1 x instructions

1 x mask

6 piece plastic and perspex polishing kit

Larger picture

Ideal for cleaning and restoring fibreglass car bodies, sidecar

bodies, motorcycle fairings, plastic bumpers, mudguard's,

perspex windscreens, etc.

Kit includes,1 of each:

100 x25mm Calico B roughing mop
Steel arbor for drill
100 x 25mm Calico G finishing mop
Set of instructions
Mini Bar of Tripoli roughing polish
Mini bar Vonax finishing polish Catalogue
Plus a dust mask

9 piece std. polishing kit s-steel and alloy

Larger picture

A smaller version of our Heavy Duty polishing kit. For use on any DIY electric drill. Will polish out most minor scratches from say 240grit abrasive paper and polish to a mirror finish on all metals i.e. aluminium alloys, copper, brass, steel, stainless and chrome. Sufficient for all the metal on one motorcycle or car.

Please note: If parts are lacquered, scratched, anodised or have any other coating you must complete all abrasive work before using this kit.

See abrasive or this section for pre-polishing abrasive kits

Click here for a short video on engine and casing polishing

Kit includes:

1 x Steel arbor,
1 x 100mm x 25mm Sisal st/mop,
1 x 100mm x 25mm white st/mop
1 x 100mm x 25mm calico finishing mop
1 x mini bar supercut polish,
1 x mini bar blue polish/white
I x dust mask and instructions
1 x felt bob.

Swinging arm and frame polishing kit

Larger picture

To polish motorcylcle frame and swinging arm fom start to finish, the kit consists of mops to use with satene abrasive. To intially remove all marks and then mops to and polishes to achieve a mirror finish.

Kit includes

1 x 100 x 25 sisal
1 x 100 x 25 stitched
1 x 100 x 25 calico
1 x 100 x 25 coloured stitched 1 x 75 x 25 coloured stitched
2 x half bars of polish
1 x bar satene grit
1 x felt
1 x drill arbour
Dust mask
Instructions

Complete alloy wheel abrasive and mirror finishing kit

Larger picture

This kit is designed to complete all abrasive work on alloy wheels from 150 grit to 800 grit. The abrasives are suitable for removing lacquer and medium scratches before polishing begins. When 800 grit finish is achieved the mops, felts, and polishes are used to mirror finish the alloy wheel an electric drill and mop arbour can be used abrasive and polishing work.

Kit contains:

1 x 3 x 0.5 coloured stitched mop

1 x 3 x 1 coloured stitched mop

2 x 2 x 1 coloured stitched mop

1 x 2 x 1 sisal mop

1 x 2 x 1 white stitched mop

1 x 2 x 1 calico mop

1 x 3 x 1 sisal mop

1 x 3 x 1 white stitched

1 x 3 x 1 calico mop

1 x drill arbour

1 x yellow goblet

1 x white goblet mop

1 x half bar satene 150 grit

1 x half bar satene 240 grit

1 x half bar satene 300 grit

1 x 400 wet and dry

1 x 800 wet and dry

1 x mini grey

1 x mini white

4 x unmounted felts

1 x felt spindle

2 x unmounted bobs

2 x unmounted cones

1 x dust mask and instructions

Motorcycle levers, footrests and forks complete abrasive and polishing kit

Larger picture

This kit is designed to complete all abrasive work on forks and levers etc. from 150 grit to 800 grit. The abrasives are suitable for removing lacquer and medium scratches before polishing begins. When 800 grit finish is achieved the mops, felts, and polishes are used to mirror finish the forks and levers etc. an electric drill and mop arbour can be used abrasive and polishing work.

Kit contains:

1 x 3 x 1 coloured stitched mop

1 x 3 x 0.5 coloured stitched mop

2 x 2 x 1 coloured stitched mop

1 x half bar satene 150 grit

1 x half bar satene 240 grit

1 x half bar satene 300 grit

1 x 400 wet and dry

1 x 800 wet and dry

5 x unmounted bobs and cones (various)

1 x spindle for cones

1 x 3 x 1 sisal mop

1 x 3 x 1 calico mop

1 x 3 x 1 stitched mop

1 x mini grey

1 x mini white

1 x drill mop arbour

2 x small mounted felt cones

2 x cartridge rolls 120 grit

1 x spindle cartridge roll

1 x dust mask and instructions

General purpose polishing kit

Larger picture

A small general purpose polishing kit which will polish most aluminium alloys, copper, brass and steel to a bright finish and will remove marks and scratches from 400 grit abrasive paper. Sufficient for 1 bike or car or any jobs around the house copper kettles, brass door handles etc.

Kit includes:

1 Steel arbor
4x1 coloured stitched
4x1 calico mop
1 x green mini bar
1 Mini bar Tripoli
1 Dust mask and instructions
1 felt bob

15 piece heavy duty polishing kit

Larger picture

Complete kits specially produced for use with any standard DIY electric drill. Polish up to mirror finish enough materials to polish all alloy parts on several bikes or cars.

Please note: If parts are lacquered, scratched, anodised or have any other coating you must complete all abrasive work before using this kit.

See abrasive or this section for pre-polishing abrasive kits

Click here for a short video on motorcycle frame polishing

The kit includes:

Half bar of supercut
1 dust mask
1 of 100 x 25mm sisal st/ mop
1 of 100 x 25mm white st/ mop
1 of 100 x 25mm cloth mop, quality 'G'
3 x dental brushes
Half bar white or blue finishing polish
1 of steel adaptor for drill
4 felt bobs

6 inch set of mops + LH RH pigtails

Larger picture

6" mops sisal, stitched, calico and 2 arbours R/H and L/H

Ideal general purpose mops and the best all-round mop for finishing steel and pressed brassware, nickel, silver, copper, aluminium and for finishing nickel and chrome deposits. Used extensively in the jewellery trade for grease mopping of gold and silver, etc. Available in 13, 25, 38 and 50mm sections, loose leaf-unstitched. Stitched varieties available to order. Can also be used on plastics. These mops are also available in diameters from 75 to 300mm

Lacquer removal abrasive kit + frame and engine cover polishing kit

Larger picture

This kit is an excellent all round kit for intial removal of lacquer and other coatings that must be removed before starting to polish. The kit is a two-stage abrasive kit from 150 grit flap wheel to 300 grit satene (we then recommend some 400, 800, 1,000 wet and dry - not supplied.) Then the polishing process can begin with the mops and polishes supplied

Contents:

1 x 4 x 1 sisal mop

1 x 4 x 1 white stitched mop

1 x 4 x 1 calico mop

2 x 3 x 1 coloured stitched mop

1 x half bar satene 300 grit

2 x 150 grit fibral flap wheels

2 x felts

1 x mini grey polish

1 x mini white polish

1 x instructions

1 x mask

Car rocker head cover polishing kit

Larger picture

This kit is used for polishing aluminium car rocker covers. It has been specially designed and tested and by following the instructions a mirror finish can be produced with minimum effort.

Contents.

3 mounted felt bobs
1 white polish
1 grey polish
1 flap wheel 50 x 30 - 150 grit
1 fibral mop 4" x 4 lap
1 3" x 1" sisal mop
1 3" x 1" stitched mop
1 x 4" x 1" calico mop
2 sheets of 400 wet and dry
2 sheets of 800 wet and dry
2 sheets of 1000 wet and dry
1 Belgom ALU
1 pigtail/drill arbour
1 dust mask
1 instructions

Motorcycle and car alloy wheel polishing kit

Larger picture

This is an excellent kit to polish alloy wheels to achive that professional finish, all mops, felts in the kit are used witha hand-held electric drill and are shaped to make the polishing operation quicker and easier. The kit contains enoough products to finish approximately 4 wheels. This kit is designed only for restoring pre-polished wheels to a polished or mirror finish. If you require abrasive work to be done on your wheels contact us for more information.

Please note: If alloy wheels are lacquered, scratched, anodised or have any other coating you must complete all abrasive work before using this kit.See abrasive or this section for pre-polishing abrasive kits

Click here for a short video on Alloy wheel polishing

Contents

1 x goblin tapered polishing mop (hard yellow)
1 x goblin tapered polishing mop (smooth white)
1 x 4” x 1” calico G finishing mop
1 x mini grey super cut bar
1 x mini white finishing bar
1 x long series felt cone arbour
2 x felt cones 25 x 35
1 x belgom finishing cream
1 x drill arbour
1 x instructions
1 x mask
1 x polishing manual

Cylinder head and barrel fin polishing kit

Larger picture

A specially designed kit that firstly includes ali brite cleaner, this is a dilute acid based cleaner to remove oxidisation. The kit includes special cratex abrasive cylinders made from premium quality silicon carbide moulded to shape. They fit into the fins on an engine for initial cleaning, leaving the an excellent surface for the final professional finish achieved with felt cylinders and compounds provided.

Click here for a short video on engine and casing polishing

Contents

1 x Ali Brite cleaner fluid (handle with care!)
1 x felt long series spindle
1 x cratex long series spindle
1x grey polishing compound
1 x white polishing compound
1 x drill arbour
1 x 2” x 1” calico finishing mop
10 x cratex abrasive cylinders 6 x 25
15 x felt polishing bobs 6 x 25
1 x dust mask
1 x instructions
1 x polishing manual

Mini mop multi-purpose kit

Larger picture

This kit includes mini-mops and polishes for all those little polishing jobs around the house, car, garage, kitchen, motorcycle, bike etc. The kit includes polishes for alloy, brass, stainless, copper, steel, plastics, perspex, chromes, knives and spoons etc.

Kit includes

1 x 2" x 1" sisal mop

1 x 1" x 1" sisal mop

2 x 2" x 1" calico mops

2 x 1" x 1" stitched mops

1 x 25mm x 30mm felt cone

1 x 25mm x 30mm felt bob

1 x 12mm x 20mm felt bob

1 x felt arbour

1 x drill arbour

1 x brown polish (brass)

1 x green (chrome/multipurpose)

1 x white (alloy/stainless/steels)

1 x grey (initial polishing of metals)

1 x light brown (vonax) for plastics and perspex

1 x Instructions

1 x Dust mask

1 x polishing manual

Chrome kit

Larger picture

This kit is mainly for polishing chrome or tarnished chrome to a mirror finish, and then protect it with Belgom Chromes.