Polishing spindles/machines

6" creusen quality polishing machine

Larger picture

Complete with guards and twin-taper spindles, a pedestal stand can be purchased as an extra item. Contact us for details on stands.

Specification:

6” wheel

Single phase

350W

Weight – 8.75Kg

8" creusen quality polishing machine

Larger picture

Complete with guards and twin-taper spindles, a pedestal stand can be purchased as an extra item. Contact us for details on stands.

Specification:

8” wheel

Single phase

600W

Weight – 10Kg

8" 3 phase polishing machine

Larger picture

Complete with guards and twin-taper spindles, a pedestal stand can be purchased as an extra item. Contact us for details on stands.

Specification:

8" wheel

3 phase

1,000W

415v,

2800 rpm

Polishing spindle

Larger picture

This spindle is multipurpose and can be used for abrasive drilling or polishing work

15" x 0.675" spindle. 0.5" L/H R/H threaded end

2 x pulleys ('A' section) 2.25" and 3"

2 x tallboys 0.625"

1x 0.5" hand-chuck

Plus nuts

PLEASE READ DISCLAIMER IN TRADE SECTION

Polishing machine

Larger picture

This machine is used in conjunction with an electric motor on a bench and is good for many polishing operations.

Height of spindle 4 3/4" from base

12" x 0.625" spindle

1 x R/H L/H pigtail

1 x 2.25" pulley

2 x flanges

Plus nuts

PLEASE READ DISCLAIMER IN TRADE SECTION

Speed shaft R/H or L/H

Larger picture

Used for drives on machines or sub-assemblies such as saw benches, can be used as a drive for polishing and other cleaning operations. Die cast aluminium housing with steel spindle, two sealed bearings, flanges, pulleys, nuts. Maximum speed 500rpm, load not exceeding 45Kg.

Dimensions:

Casting = 150mm long x 80mm wide securing legs

0.75" main shaft approximately 200mm long

Leg centre length 115mm

Leg centre width 65mm

2 x 0.625 bearing shoulder

0.5" L/H or R/H threaded shoulders

2.25" A section pulley

0.625" bore

PLEASE READ DISCLAIMER IN TRADE SECTION

Large heavy duty polishing/buffing spindle

Larger picture

This spindle can be used with motors from 0.5hp and upwards, ideally it supports polishing mops and buffing wheels from 6" to 12" diameter, with the motor running between 500 and 3,000 rpm. The spindle runs on 2 x 1" ball bearings and has a 2.3.4. A section pulley to alter the spindle speeds for various mops to be used effectively. The spindle can be packed up and used with the mops off the bench or on the bench surface. - See more pictures.

Parts specification.

1 x 1” diameter spindle 24” long with 0.75” threaded end a tapered nose end

2 x 1” ball bearing plummer blocks with securing holes

1 x 2.3.4. “ A section multi pulley

PLEASE READ DISCLAIMER IN TRADE SECTION

0.5" polishing spindle

Larger picture

Complete with 0.5" R/H and 0.5" L/H pigtails, 2 x 0.5" ball bearing plummer blocks, 1 x 2.25" A section pulley. Pack the spindle up on your bench or place the spindle over the edge of your bench. Set to the height you require, bolt it securely and when it is attached to a single or three phase motor approximately 1,000 to 3,000 rpm, the spindle with 2" to 6" mops attached will allow you to complete all your polishing needs. Mops can be purchased seperately for this machine

PLEASE READ DISCLAIMER IN TRADE SECTION

9 Inch pedestal polisher

Larger picture

This polisher is made of aluminium 4x4 inch box section and is designed for home or industrial use, it is secured to a work bench by 4x 8mm bolts ( not supplied ). The polisher will accommodate from 2 inch to 10 inch polishing mops and has the versatility to allow for polishing with different size mops on both sides of the polisher.

This polisher is designed to use single or three phase motors

up to 2 hp and max rpm is 4,000 rpm it is suitable for most home polishing motor cycle, car and medium industrial jobs.

There are various attachments, arbours and wire wheels that can be purchased form abc website see left hand menu.

specification

2x 5/8 sealed rigid Plummer blocks with extended inner race and grub screws

2x 5/8 pigtails L/H /R/H with grub screws

1x 5/8 steel spindle 12 inch long

1x 2 1/4 A section pulley with grub screw

1x 12 inch pedestal 4x4 aluminium box section

1x top plate welded

1x bottom plate welded with 4x 8mm securing holes

PLEASE READ DISCLAIMER IN TRADE SECTION

Polishing machines/spindles

6" creusen quality polishing machine

8" creusen quality polishing machine

8" 3 phase polishing machine

Polishing spindle

Polishing machine

Speed shaft R/H or L/H

Large heavy duty polishing/buffing spindle

0.5" polishing spindle

9 Inch pedestal polisher