Foam abrasive pads
PICT0342
Larger picture
Medium grade abrasive pads.  10 per pack
0.120 kg

Scotch bright fibral matting
PICT0589
Larger picture
The Scotch Bright fibral mattings are ideal for the initial cleaning of soiled parts, two grades are available, coarse and fine 6" x 6" square. Come in a pack of five.
0.300 kg

Fine green tool grinding stones and arbour - set of 5
PICT0718
Larger picture
These stones are useful for small tool grinding, chisel sharpening etc. They come complete with a 0.25" arbour and can be used with hand or machine drills, or with our machine spindles. Spec. 1.25" x 0.25"
0.100 kg

Medium grade deburring stones and arbour - Set of 5
PICT0720
Larger picture
These stones are very useful on steel for deburring and grinding, they come complete with a 0.25" arbour. Use with hand or machine drill or with our machine spindles. Size 1.5" x 0.5"
0.200 kg

Wet and dry paper
PICT0686
Larger picture
This abrasive paper is essential as part of abrasive preparation before polishing can take place. Two grades are supplied 400 grit and 800 grit - 2 x sheets of each.
0.500 kg

4" model makers aluminium plate plus 12 assorted abrasive discs
PICT0691
Larger picture
This plate is used for small sanding operations on wood and plastics. Simply stick the abrasive disc with glue to the faceplate, place in a small lathe chuck and sand as required
0.190 kg

5" rubber backed disc with 12 assorted abrasive discs
PICT0695
Larger picture
These discs are used on a hand drill and are good for removing sharp edges from metal and plastics. Also for removing rust from car/motorcycle parts.
0.250 kg

Satene grit - Full bar
Satene grit
Larger picture
Satene grit comes in bars from 80 to 320 grit. This product is used in conjunction with stitched mops for the initial cleaning of scratched surfaces on metals. Size of bar is 8" x 2"
1.350 kg

Satene grit - Half bar
Satene grit
Larger picture
Satene grit comes in bars from 80 to 320 grit. This product is used in conjunction with stitched mops for the initial cleaning of scratched surfaces on metals. Size of bar is 4" x 2"
0.640 kg

Coldax cement abrasive kit
DSC00240
Larger picture
This kit is used with a hand drill, apply the coldax to the coloured mops, coat with abrasive grits and when dried the mops become an abrasive wheel, excellent for heavy, medium light scratch removal, pre-polishing work, the kit is suitable for steels, alloys and stainless steels.
1.350 kg

 

Kit contains

  • 1 x tub 80 grit abrasive 250 grams
  • 1 x tub 150 grit abrasive 250 grams
  • 1 x tub 240 grit abrasive 250 grams
  • 1 x tub coldax cement 200 grams
  • 1 x drill arbour
  • 3 x 3 x 0.5 coloured mop
  • 3 x 2 x 1 coloured mops
  • 1 x 4 x 1 coloured mops
  • 1 instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing 

Abrasive rubber points
DSC00411
Larger picture
Abrasive rubber points are excellent to complete abrasive work on hard to reach small areas on aluminium, i.e. counterbores, recesses etc.  300 grit satene on a small felt can be used after the rubber points to prepare a surface for final polising.

Contents

2 x abrasive rubber points (bobs) 120 grit 10 x 15

2 x abrasive rubber points (cones) 220 grit 10 x 20

2 x abrasive rubber points (bobs) 220 grit 10 x 20

2 x abrasive rubber points (cones) 120 grit 10 x 15


"" is powered by ShopFactory e-commerce software, award winning shopping cart software to create online shops to sell online.