Felt bobs and kits

Felt bobs mounted

Larger picture

All the types shown are used for cleaning and polishing in those awkward places, can be used with polishing and abrasive grits

All felts sizes could vary slightly in size, depending on stock availability

0.010 kg

Felt bobs unmounted

Larger picture

0.010 kg

Felt cones mounted

Larger picture

0.010 kg

Felt cones unmounted

Larger picture

0.010 kg

Abrasive rubber points

Larger picture

Abrasive rubber points are excellent to complete abrasive work on hard to reach small areas on aluminium, i.e. counterbores, recesses etc. 300 grit satene on a small felt can be used after the rubber points to prepare a surface for final polising.

Contents

2 x abrasive rubber points (bobs) 120 grit 10 x 15

2 x abrasive rubber points (cones) 220 grit 10 x 20

2 x abrasive rubber points (bobs) 220 grit 10 x 20

2 x abrasive rubber points (cones) 120 grit 10 x 15

Mounted felt bob and cone polishing kit

Larger picture

This kit is ideal for polishing those awkward spots to a mirror finish. All pre-abrasive work must have been completed before using this kit

0.720 kg

Contents:

5 x felt bobs medium grade
5 x felt cones medium grade
1 x mini white polish
1 x mini grey polish
1 x instructions
1 x mask

A suitable mask, gloves, goggle and ear defenders should be worn when polishing, see: gbrworkwear.com/-c-49-html

Felt bob and cone satene abrasive kit

Larger picture

This kit is excellent for cleaning out those awkward places. The satene grit is applied to the felts and with the use of a hand drill the gentle effect of the satene abrasive smooths away those dirty marks ready for polishing.

0.720 kg

Contents:

5 x felt bobs medium grade
5 x felt cones medium grade
1 x half bar 240 grit satene
1 x instructions
1 x mask

A suitable mask, gloves, goggle and ear defenders should be worn when polishing, see: gbrworkwear.com/-c-49-html

Cleaning dental and felt kit

Larger picture

The cleaning dentals in this kit are great to brush away all those dirty corners and clean those dirty gaps. Then with the felt a polished surface can be achieved leaving corners and gaps looking bright and shiny.

0.450 kg

Contents:
2 x wire wheels
2 x cup brushes (nylon)
2 x nylon fibre brushes
1 x knife felt
2 x pencil brushes
1 x cut brush (brass)
1 x felt long arbour
2 x small felt wheels (unmounted)
2 x medium felt wheels (unmounted)
1 x 6 x 10 felt bob
1 x 10 x 10 felt cone
3 x umnounted felt various
1 x grey polish
1 x white polish
1 x instructions

A suitable mask, gloves, goggle and ear defenders should be worn when polishing, see: gbrworkwear.com/-c-49-html